Ziggy - Original
Page |
1
|
2
|
3
|
Total images:
60
| Last update:
1/15/08 12:23 PM
| ©
JAlbum
&
Chameleon
|
Help
![03260023[1]](thumbs/03260023[1].jpg "I Carefully marked the center of the...")
![03230013[1]](thumbs/03230013[1].jpg "Pictured here is a 16mm plastic iris....")
![03230009[1]](thumbs/03230009[1].jpg "I fit the eyeballs to the fixture...")
![03250005[1]](thumbs/03250005[1].jpg "I used 3/8\" hobby wood to make...")
![03250006[1]](thumbs/03250006[1].jpg "I needed to do some sanding to...")
![03230001[1]](thumbs/03230001[1].jpg "Here's where I fit the eyes before I...")
![03250001[1]](thumbs/03250001[1].jpg "I used a standasd 82 deg. countersink...")
![03260003[1]](thumbs/03260003[1].jpg "I used 10-24 x 2-1/2\" oval head...")
![03260001[1]](thumbs/03260001[1].jpg "In order to keep the lower nut from...")
![03230002[1]](thumbs/03230002[1].jpg "This is a shot of the final fitting...")
![03230005[1]](thumbs/03230005[1].jpg "I drilled pilot holes to check for...")
![03250008[1]](thumbs/03250008[1].jpg "I used a wire bender to bend the and...")
![03250007[1]](thumbs/03250007[1].jpg "I chose a side-to-side eye movement....")
![03270002[1]](thumbs/03270002[1].jpg "Here I'm prefitting the eye control...")
![03270010[1]](thumbs/03270010[1].jpg "Good fixturing helps!")
![03270017[1]](thumbs/03270017[1].jpg "Step back and take a look.")
![03310004[1]](thumbs/03310004[1].jpg "These are the pre cut parts that I'm...")
![03310006[2]](thumbs/03310006[2].jpg "So far so good.")
![03310014[2]](thumbs/03310014[2].jpg "I sanded the ends with a belt sander.")
![03310015[2]](thumbs/03310015[2].jpg "I routed the edge and neck ball...")
![03310016[2]](thumbs/03310016[2].jpg "I used peal and stick white felt from...")
![04050001[2]](thumbs/04050001[2].jpg "The first coat of paint. Right from...")
![04050006[1]](thumbs/04050006[1].jpg "Now for some hand painted trim work.")