|
|
![03230001[1].jpg - Here's where I fit the eyes before I committed to glue the assembly in place with Apoxie Sculpt. Which, by the way, is amazing stuff. It's like 2 part clay and it dries like hard plastic. I don't think I could have built this head assembly without it.](03230001[1].jpg "Downsized Image [03230001[1].jpg - 58kB]") |
|
![03260023[1]](../thumbs/03260023[1].jpg "I Carefully marked the center of the..."){kind=small}
![03230013[1]](../thumbs/03230013[1].jpg "Pictured here is a 16mm plastic iris...."){kind=small}
![03230009[1]](../thumbs/03230009[1].jpg "I fit the eyeballs to the fixture..."){kind=small}
![03250005[1]](../thumbs/03250005[1].jpg "I used 3/8\" hobby wood to make..."){kind=small}
![03250006[1]](../thumbs/03250006[1].jpg "I needed to do some sanding to..."){kind=small}
![03250001[1]](../thumbs/03250001[1].jpg "I used a standasd 82 deg. countersink..."){kind=small}
![03260003[1]](../thumbs/03260003[1].jpg "I used 10-24 x 2-1/2\" oval head..."){kind=small}
![03260001[1]](../thumbs/03260001[1].jpg "In order to keep the lower nut from..."){kind=small}
![03230002[1]](../thumbs/03230002[1].jpg "This is a shot of the final fitting..."){kind=small}
| Here's where I fit the eyes before I committed to glue the assembly in place with Apoxie Sculpt. Which, by the way, is amazing stuff. It's like 2 part clay and it dries like hard plastic. I don't think I could have built this head assembly without it. |
| Total images: 60 | Last update: 1/15/08 12:23 PM | Help |