|
|
![03250007[1].jpg - I chose a side-to-side eye movement. However it's a little tricky with this casting because the tounge is in the way. It might have been easier to use a rocker arm control and dual strings. Maybe I'll do that on the next one.](03250007[1].jpg "Downsized Image [03250007[1].jpg - 47kB]") |
|
![03260001[1]](../thumbs/03260001[1].jpg "In order to keep the lower nut from..."){kind=small}
![03230002[1]](../thumbs/03230002[1].jpg "This is a shot of the final fitting..."){kind=small}
![03230005[1]](../thumbs/03230005[1].jpg "I drilled pilot holes to check for..."){kind=small}
![03250008[1]](../thumbs/03250008[1].jpg "I used a wire bender to bend the and..."){kind=small}
![03270002[1]](../thumbs/03270002[1].jpg "Here I'm prefitting the eye control..."){kind=small}
![03270010[1]](../thumbs/03270010[1].jpg "Good fixturing helps!"){kind=small}
![03270017[1]](../thumbs/03270017[1].jpg "Step back and take a look."){kind=small}
![03310004[1]](../thumbs/03310004[1].jpg "These are the pre cut parts that I'm..."){kind=small}
![03310006[2]](../thumbs/03310006[2].jpg "So far so good."){kind=small}
| I chose a side-to-side eye movement. However it's a little tricky with this casting because the tounge is in the way. It might have been easier to use a rocker arm control and dual strings. Maybe I'll do that on the next one. |
| Total images: 60 | Last update: 1/15/08 12:23 PM | Help |