Ziggy - Original
Good fixturing helps!
Total images:
60
| Last update:
1/15/08 12:23 PM
|
Help
![03270010[1].jpg - Good fixturing helps!](03270010[1].jpg "Downsized Image [03270010[1].jpg - 68kB]")
![03230002[1]](../thumbs/03230002[1].jpg "This is a shot of the final fitting..."){kind=small}
![03230005[1]](../thumbs/03230005[1].jpg "I drilled pilot holes to check for..."){kind=small}
![03250008[1]](../thumbs/03250008[1].jpg "I used a wire bender to bend the and..."){kind=small}
![03250007[1]](../thumbs/03250007[1].jpg "I chose a side-to-side eye movement...."){kind=small}
![03270002[1]](../thumbs/03270002[1].jpg "Here I'm prefitting the eye control..."){kind=small}
![03270017[1]](../thumbs/03270017[1].jpg "Step back and take a look."){kind=small}
![03310004[1]](../thumbs/03310004[1].jpg "These are the pre cut parts that I'm..."){kind=small}
![03310006[2]](../thumbs/03310006[2].jpg "So far so good."){kind=small}
![03310014[2]](../thumbs/03310014[2].jpg "I sanded the ends with a belt sander."){kind=small}
![03310015[2]](../thumbs/03310015[2].jpg "I routed the edge and neck ball..."){kind=small}